| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 1 Year |
| Transport Package: | Inner Box +Outer Carton |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Paintless Dent Repair Tools Dent Remover Puller Lifter Set Dent Tool Kit
Item No.:BT20004B
Include:
1pc Dent Lifter
1set Cross Bar Puller
30pcs Glue Tabs
1set Tap Down Set
1pc Mini T Bar
6pcs Glue Stick
1pc Bottle
1pc Scraper
1pc glue gun-100w
1pc 25mm hammer
1pc Tool Bag
Packing:
1.Neutral inner box + Ourter Carton.
2.According to your request
Application:Car Body Dent Repair
Function:Repair Car Dent Body
Used for:Repairing Car Body Dents
Advantages:
1.The operation is very simple, basically everyone can operate. Saving time, effort and money is the key.
2.No damage to the paint and body.
1.The first position in the vehicle collision / dent. Clean the surface of the process. Use only mild cleaning agents.The use of surface coarse sponge, will cause irreparable damage.
2. Use the glue gun, push the glue stick into the back of the glue gun . Heating the glue gun and the glue stick melt.
3.Use hot glue gun, put glue on the glue tab, and then place the recess in the dent glue tab.
4.Use the dent mini lifter extraction of the bump.When the temperature reaches the right time, do not be too hard. Then pull until the glue tab is removed.
5.You also can use the puller bridge.Place puller bridge stand over the puller tab,setting adjusters to desired length.Screw the knob nut slowly,and continue to rotate until dent is raised.Stop when dent returns to normal surface level of the car body.
6.If a too high glue spot has been created,use a rubber hammer and lightly tap
the leveling pen agent raised spot to remove.
If the dent surface is big,can make it again.
7.Use the release agent , dissolve glue. Use of the scraper, remove the glue.
8.Finally, use a soft clean cloth wipe again residual glue, make the body to restore new look.
VISUAL CONTROL
For the control, it is recommended to work in oblique light with the reflection of a
double neon light, to assess the details of the painting.
REMOVAL OF THE DENT REPAIR SUCTION CUP
To remove the dent repair suction cups, simply pour a few drops of household
alcohol between the suction cup and the sheet metal.
1. If the repaired part has a slight dent, it is recommended to use the equaliser tip
Holder provided in the kit.
2.To remove any remaining traces of glue, use household alcohol with the sprayer.
Product Catalog:
){kind=link}